Hardware Needed to Install Caltric Spindle Assemblies to X300 Deck
X390 with Accel Deep 54A Mower Deck
Accel Deep 54A Mower Deck
The 54-in. (137-cm) Accel Deep Mower Deck is a stamped-steel, deep, apartment-top design that delivers excellent cut quality, productivity, cleanliness, immovability, and versatility. Optimal performance and dispersion of clippings is provided, even at faster mowing speeds or in alpine grass:
- 4.83-in. (12.three-cm) depth throughout the entire deck shell for optimum mowing, mulching, and bagging operation
- Optional lever-activeness or electric one-touch MulchControl™ arrangement provides superior mulching operation and versatility.
- Stamped-steel pattern eliminates sharp edges and corners where material can build up and diminish mowing performance
- Mower deck is suspended from the vehicle for a shine and level cut
- Adjustable mower wheels, positioned merely higher up ground level, assist reduce scalping
- 0.25-in. (vi.four-mm) cut-tiptop increments allow the mower to exist set at the desired cutting height
- Uniform with high-functioning Ability Menstruation™ material collection systems
- For employ on X380, X384, X390, X394, X570, X580, X584, and model yr 2016 and newer X590 Tractors
Excellent cut quality
54A Mower Deck top
54A Mower Deck underside
Deep mower-deck stamping gives excellent cutting quality. It allows the cut and suspended textile room to exit the deck without getting recut:
- Reducing the amount of recutting enables more power to exist used to cut incoming grass, which profoundly improves mower chapters.
- Helps maintain excellent cut quality at faster mowing speeds
- Clean flow of material out of discharge area prevents cut material from interfering with cut the incoming grass, making it possible for the blades to cut incoming textile cleanly.
- Fifty-fifty in mulching mode, cutting evenness is improved compared to other designs because the additional depth allows for continuous apportionment, optimal recutting, and an even distribution of clippings.
- Exact Suit deck-leveling organisation allows for easy and authentic leveling of the mower deck
Productivity - getting the chore washed fast
Right side of Accel Deep 54A Mower Deck
Deep mower-deck stamping gives high productivity, which gets the chore done fast. It allows the cutting and suspended fabric room to exit the deck quickly, reducing the amount of recutting so more power is available to procedure incoming grass:
- Profoundly improves mowers capacity to maintain excellent mowing performance in difficult mowing atmospheric condition and at college speeds
Large discharge opening is both high and wide to handle more material:
- Gives a polish, even discharge of clippings at all mowing speeds
- Reduces the risk of plugging, particularly important when operating in moisture, thick, or dense grass and when bagging
- The 54A Power Flow blower has an inlet housing with over 20 per centum greater area than the 54X Power Menstruation blower used on previous machines.
Cleanliness - for the mower and the operator
Accel Deep 54A Mower Deck
Accel Deep 54A Mower Deck
The flat-top shape of the deck stamping is optimal for keeping itself and the operator clean:
- There are few places to catch and concur fabric on top and underneath the deck.
- Peak of deck stays cleaner, reducing time and effort needed for cleaning and service
- Underside of deck is self-cleaning to maintain optimum operation without buildup of material to interfere with the flow of air and clippings
- Less need to clean and remove buildup of material from underside deck
- The depth of the Accel Deep mower deck minimizes the amount of material that escapes from the forepart of the deck:
- Express corporeality of material to drift onto the operator and mower deck
- Even for cloth discharged out the chute, less recutting results in larger pieces that are less likely to stop up on the operator
- Mulching prevents the discharge of material completely and MulchControl makes mulching a practical solution for most mowing situations.
Cleaning a mower deck, both height and bottom, is one of the well-nigh frequent maintenance activities:
- The flat-tiptop pattern reduces places for material to build up and makes material that does collect easy to remove.
Mower launder port
Mower wash port with hose connector
A wash port is provided to make cleaning the underside of the mower deck easy.
- Hose connector is included with the mower deck.
Superior durability is designed in
Spindle pocket with flip-upwards cover
Piece of cake-to-adjust mower wheel and mower side reinforcement
The 54A Mower Deck has strong spindle pockets, to keep the blades aligned, even after years of tough service:
- Stamped from strong 10-gauge, 0.135-in. (three.4-mm) steel
- Ribs in the deck shell add strength where it is needed.
- The 54A has a 3 percent heavier overall weight than the Edge™ Xtra 54-in. (137-cm) Mower Deck used on previous machines.
Mower wheels are heavy duty:
- Provides greater strength and durability for longer, trouble-free life.
- Setting wheels to the correct height for the cutting top quick and easy.
Low-tension belt-bulldoze design reduces the side load on engine lower bearings and mower deck bearings for longer life.
The 54A Mower Deck features a v/eight-in. (16-mm) diameter solid-steel rod side bumper that provides extra strength and protection.
Dual-stage E-glaze and powder-pigment coatings provide extra protection from rust.
Versatility - easy to change between side discharge, mulch, and bagging modes
The 54A Mower Deck is designed for maximum versatility, providing the greatest ease in changing from ane mower discharge mode to some other:
- With an optional MulchControl system installed (along with the special mulching blades), changing from mulch way to side belch mode or vice versa is done with the simple flip of a lever or touch on of an electrical switch.
- The Power Flow rear bagger can be used with MulchControl by only using the MulchControl lever or electrical ane-impact switch to movement the MulchControl baffle to the side-discharge position.
7-bu (247-50) Power Flow rear bagger
Optional 7-bu (247-50) rear bagger
Ability Menstruum blower
An optional 7-bu (247-L) rear bagger material drove system (MCS) is available. It provides an efficient means of collecting grass clippings and leaves:
- The Power Flow blower and chute are easy to install. The Ability Menses blower swings out for easy cleanout and cleanup.
- The hopper blueprint provides modern styling, swell bagging performance, cleaner performance, and piece of cake-to-empty bags:
- 7-bu (247-L) chapters
- Like shooting fish in a barrel-to-attach Power Menstruum blower (ordered separately)
- Piece of cake-to-adhere chute (ordered separately)
- Air frazzle duct
- Convenient spring-latch
- Airflow make full indicator
- Quik-Tatch mounting
- Sealed hopper tiptop
- Loose-knit bags available
Larger 14-bu (493-50) and 19-bu (670-L) MCS are available, in addition to the seven-bu (247-L) MCS, for specific X300 and X500 Series Tractor models.
Mower blades
Side-discharge blades can be used with the Power Menses system when bagging.
Mulching blades are included with the optional MulchControl system. They can be used for mulching, side discharging, and bagging.
Mower blade use chart
Style(s) of operation | Mower blade |
Side discharging style only | Side-belch blade (shipped with mower) |
Mulching style only | Mulching bract (shipped with MulchControl) |
Side discharge and mulching | Mulching blade (shipped with MulchControl) |
Bagging | Either side-belch or mulching blade |
0 Response to "Hardware Needed to Install Caltric Spindle Assemblies to X300 Deck"
Post a Comment